Welcome, Guest. Please Login or Register
YaBB - Yet another Bulletin Board
  By continuing to use the forum you are agreeing to the updated Forum Rules. If you do not agree with the updated Forum Rules you may close your account.
  HomeHelpSearchMember MapLoginRegister ASSRA HomePage  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Canjar M-2S Trigger (Read 427 times)
lzenglish
Newbie
*
Offline



Posts: 3

Canjar M-2S Trigger
Oct 9th, 2013 at 8:32pm
 
Hello: Wondering if a member knows what the "S" indicates on my Canjar trigger? The trigger is currently mounted on my custom made Interarms Mark X .300 win mag. The entire number reads M-2S.

Thanks for any help,

Wayne
Back to top
 
 
IP Logged
 
lzenglish
Newbie
*
Offline



Posts: 3

Re: Canjar M-2S Trigger
Reply #1 - Oct 9th, 2013 at 10:24pm
 
Update: I found a look alike trigger that had the safety linkage on it. I'm wondering now if this "S" means the innards are set up to add the safety linkage later if so desired? I could not read any part numbers on this one, and the forum member did not say what the part number was. Thoughts if any?

Thanks

PS I'm still trying to post pictures but having a hell of a time
Back to top
 
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Online



Posts: 2128

Southern NJ, USA
Re: Canjar M-2S Trigger
Reply #2 - Oct 10th, 2013 at 6:26am
 
Sure you've got the right forum? The ASSRA is a single-shot rifle forum, primarily for Schuetzen shooting. Isn't your Interarms Mark X a Mauser-based bolt-action (strictly forbidden in Schuetzen shooting) repeater (also against the rules)? You might want to try the forum at 6mmbr or The High Road.
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print