Page Index Toggle Pages: 1 Send TopicPrint
Sticky Topic Fraser Highlander. (Read 9340 times)

Posts: 797
Location: NZ
Joined: Jun 1st, 2006
Fraser Highlander.
Aug 12th, 2014 at 6:52pm
Print Post  
Before I had read the article on them by Frank De Haas I bought one of these as a barreled action and in 22 Hornet from a friend about fifteen years ago but when I came to fire it the firing pin would drag across the base of the cartridge making it extremely difficult to open the action.
My friend when I told him about this insisted on taking it back.
A few weeks ago he told me he had just got around to looking at the firing pin and penned a rough sketch to show what he had done.
Back to top
IP Logged

Posts: 1
Location: Washington
Joined: Jun 10th, 2015
Re: Fraser Highlander.
Reply #1 - May 14th, 2016 at 5:44pm
Print Post  
I pick up one of these actions at a gun show not knowing about the problems. How did the new block work for you?
The sketch did not show the lower plunger for the new block (see attached diagram).  Was this used in the modified block and just not shown?  Thanks for the info.
(You need to Login or Register to view media files and links) ( 322 KB | 38 Downloads )
Back to top
IP Logged
Page Index Toggle Pages: 1
Send TopicPrint