Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic moa with unertl scope,useing targt. blocks add moa (Read 3147 times)
letsshoot
Newbie
*
Offline



Posts: 1
Joined: Jul 8th, 2016
moa with unertl scope,useing targt. blocks add moa
Jul 18th, 2016 at 1:18pm
Print Post  
can I shim rear block ?
  
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Online



Posts: 6621
Joined: Apr 8th, 2009
Re: moa with unertl scope,useing targt. blocks add moa
Reply #1 - Jul 18th, 2016 at 1:53pm
Print Post  
I have seen it done on several occasions with no ill affects. Steve Earl will also probably have what you need on hand.

JLouis
  
Back to top
 
IP Logged
 
letsshoot
Newbie
*
Offline



Posts: 1
Joined: Jul 8th, 2016
Re: moa with unertl scope,useing targt. blocks add moa
Reply #2 - Jul 18th, 2016 at 7:32pm
Print Post  
thanks---how do I contact steve ?    my ph. #   330-455-6607   chas.
  
Back to top
 
IP Logged
 
Schuetzenmiester
Frequent Elocutionist
*****
Offline



Posts: 6250
Location: Cool Wet Side of WA
Joined: Apr 27th, 2008
Re: moa with unertl scope,useing targt. blocks add moa
Reply #3 - Jul 18th, 2016 at 9:50pm
Print Post  
I make shims out of a pop can.
  

"some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence
Back to top
 
IP Logged
 
letsshoot
Newbie
*
Offline



Posts: 1
Joined: Jul 8th, 2016
Re: moa with unertl scope,useing targt. blocks add moa
Reply #4 - Jul 22nd, 2016 at 7:52am
Print Post  
how many 2 gain 20 / 40 moa ?   thanks,chas
  
Back to top
 
IP Logged
 
wesg
Full Member
***
Offline



Posts: 102
Joined: Sep 13th, 2004
Re: moa with unertl scope,useing targt. blocks add moa
Reply #5 - Jul 27th, 2016 at 2:18am
Print Post  
On 7.2" base spacing: .040" for 20 MOA, .080 for 40.
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 11569
Location: Oregon
Joined: Feb 2nd, 2009
Re: moa with unertl scope,useing targt. blocks add moa
Reply #6 - Jul 28th, 2016 at 10:24am
Print Post  
I've used sheet aluminum in .10" or thicker to make base shims. On one rifle I tried stacking bases and using Loctite 620 to "glue" them together and allow me to get a lot farther out for long range work. I had that stacked base setup on my gun for a long time and it held up great. When I took them off, I used my heat shrink gun to get the bases pretty hot, and separate them.
  

(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
DaleHDeal
Junior Forum Member
**
Offline



Posts: 47
Location: South Carolina
Joined: Feb 3rd, 2005
Re: moa with unertl scope,useing targt. blocks add moa
Reply #7 - Aug 14th, 2016 at 11:37am
Print Post  
Tag for later......
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint