Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Stevens Favorite re-assembly (Read 393 times)
tleveler
Newbie
*
Offline



Posts: 1
Location: MD
Joined: Aug 4th, 2017
Stevens Favorite re-assembly
Aug 27th, 2017 at 6:28pm
Print Post  
After much aggravation, I figured out the issue in assembling a Stevens Favorite with the extractor which has a plunger.  The key is to install the block screw first, then insert the extractor and lever.  Use a punch to hold in place then push the extractor back toward the block using a punch inserted though the front of the receiver until the extractor pops taking the tension off of the lever and extractor.
  
Back to top
 
IP Logged
 
n.r.davis
Junior Forum Member
**
Offline



Posts: 81
Joined: Dec 3rd, 2015
Re: Stevens Favorite re-assembly
Reply #1 - Aug 27th, 2017 at 7:49pm
Print Post  
GOOD FOR YOU!
Also something to consider is using "Slave Pins" to hold assemblies together until the main pins get put in.  David
  
Back to top
 
IP Logged
 
uscra112
Frequent Elocutionist
*****
Offline



Posts: 2055
Location: SE Ohio Hill Country
Joined: May 7th, 2007
Re: Stevens Favorite re-assembly
Reply #2 - Sep 3rd, 2017 at 9:25am
Print Post  
Good show!   I've always hated that task.  So much so that my sole 1915 Favorite has a plain extractor.  I kinda prefer it anyway, since removing an unfired cartridge doesn't involve picking it up from out of the grass.
  

<div class=
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint