Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) .22 Low Wall head space issue (Read 856 times)
chipmaker
Full Member
***
Offline



Posts: 109
Location: san diego
Joined: Sep 24th, 2007
Re: .22 Low Wall head space issue
Reply #15 - Sep 4th, 2017 at 11:08pm
Print Post  
Below is an adapter that could be used to  correct the headspace problem without a need to modify the forend or mainspring.
This adapter was an experiment on a 22 LR Maynard and so was removable In your case it would be locked in place by Loctite and  machined for the extractor.
After fitting the adapter, it is chambered, so that the front of the 22 LR cartridge case is inside the original barrel.
Otto
  
Back to top
 
IP Logged
 
Lyle
Junior Forum Member
**
Offline



Posts: 11
Location: Washington
Joined: Apr 12th, 2015
Re: .22 Low Wall head space issue
Reply #16 - Sep 5th, 2017 at 11:12am
Print Post  
PM sent.
  

Limit politicians to two terms:  office followed by prison.
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint