Page Index Toggle Pages: [1] 2  Send TopicPrint
Hot Topic (More than 10 Replies) hepburn rescue (Read 1647 times)
steel-pounder
Junior Forum Member
**
Offline



Posts: 26
Joined: Mar 26th, 2016
hepburn rescue
Aug 30th, 2017 at 3:56pm
Print Post  
Hi all,  I have a very badly miss treated Hepburn in my possession, serial number 3092. and chambered for 45.70. It was rusted almost to the point of being a solid piece of metal. Over the last several weeks I have managed to get everything freed up and functioning. And I believe most of the parts are still useable. The barrel is hopeless but could be relined and used to keep the original barrel or just rebarreled. anyway do to severe pitting I am thinking of doing a plumb brown finish to simulate the rusting and leaving the provenance of this piece instead of welding the worst pits and filing the action smooth again. Wondering what the thoughts of others are?
  
Back to top
 
IP Logged
 
Schutzenbob
Frequent Elocutionist
*****
Offline



Posts: 1174
Location: Nightingale, California
Joined: Oct 24th, 2005
Re: hepburn rescue
Reply #1 - Aug 30th, 2017 at 4:36pm
Print Post  
steel-pounder,

Luckily, Hepburn's have lots of metal to work with, I've never agreed with the notion of trying to make an old rifle look new again, I much prefer pits and dark spots to polished purple. I like my guns to have that comfortable "lived in look."  Wink
« Last Edit: Aug 30th, 2017 at 5:51pm by Schutzenbob »  
Back to top
 
IP Logged
 
Rebel
Frequent Elocutionist
*****
Offline


Happiness is a warm gun.
J.Lennon

Posts: 2035
Location: Daytona
Joined: Mar 9th, 2015
Re: hepburn rescue
Reply #2 - Aug 30th, 2017 at 5:29pm
Print Post  
It's your rifle, you should do what makes you happy.
I very much like your idea of a "sympathetic" restoration.
Shiny stuff worries me, but I like it too.

Aaron
  

WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence.
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Online



Posts: 9144
Location: The West of coarse
Joined: May 29th, 2006
Re: hepburn rescue
Reply #3 - Aug 30th, 2017 at 5:40pm
Print Post  
Hepburns are known uglies. Rust won't hurt the looks. Can we see it? We won't laugh or make smart remarks. We like ugly single shot rifles here.

Bob, what is your ugliest rifle? I mean really ugly. Maybe I should start a thread.




                   Joe.





  
Back to top
 
IP Logged
 
Schutzenbob
Frequent Elocutionist
*****
Offline



Posts: 1174
Location: Nightingale, California
Joined: Oct 24th, 2005
Re: hepburn rescue
Reply #4 - Aug 30th, 2017 at 5:50pm
Print Post  
Joe,

It isn't polite to hijack a thread, but since you asked for it, this is my 20 bore Cape Buffalo Rifle;
  
Back to top
 
IP Logged
 
steel-pounder
Junior Forum Member
**
Offline



Posts: 26
Joined: Mar 26th, 2016
Re: hepburn rescue
Reply #5 - Aug 30th, 2017 at 5:57pm
Print Post  
Yeah that is what I was thinking. no wood on mine but was going to "distress" the timber to go along with the rest of it. Ill take some WIPpictures and post. didnt think to take any of the rusted hulk before I started the electrolisis.
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Online



Posts: 9144
Location: The West of coarse
Joined: May 29th, 2006
Re: hepburn rescue
Reply #6 - Aug 30th, 2017 at 6:24pm
Print Post  
I didn't really hijack it. Only half hijacked it. I put some nice polite stuff in those posts.  I got your twenty bore gun beat all to hell. Look at this one! Ed Brown slug gun in the all time ugly dishonorable lowly .39 caliber. Top that!

By the way, Bob, you're an Accessory.



           Joe.
« Last Edit: Aug 30th, 2017 at 6:29pm by westerner »  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Online



Posts: 9144
Location: The West of coarse
Joined: May 29th, 2006
Re: hepburn rescue
Reply #7 - Aug 30th, 2017 at 6:41pm
Print Post  
steel-pounder wrote on Aug 30th, 2017 at 5:57pm:
Yeah that is what I was thinking. no wood on mine but was going to "distress" the timber to go along with the rest of it. Ill take some WIPpictures and post. didnt think to take any of the rusted hulk before I started the electrolisis.


Can't wait.



       Joe.
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 7526
Location: Oregon
Joined: Feb 2nd, 2009
Re: hepburn rescue
Reply #8 - Aug 31st, 2017 at 12:25am
Print Post  
steel-pounder wrote on Aug 30th, 2017 at 3:56pm:
anyway do to severe pitting I am thinking of doing a plumb brown finish to simulate the rusting and leaving the provenance of this piece instead of welding the worst pits and filing the action smooth again. Wondering what the thoughts of others are?


Never thought rust pits were considered provenance, or anything I'd want to keep. I'm not a fan of restored guns, but some guns are too far gone to leave as they are found. And more so if the wood is gone, and it needs replacement.
  

Vall
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
40-82Hepburn
Oldtimer
*****
Offline



Posts: 630
Location: new jersey
Joined: Feb 18th, 2008
Re: hepburn rescue
Reply #9 - Aug 31st, 2017 at 8:43am
Print Post  
SP, this sounds like an interesting plan. Looking forward to seeing the "final" results.
  
Back to top
 
IP Logged
 
steel-pounder
Junior Forum Member
**
Offline



Posts: 26
Joined: Mar 26th, 2016
Re: hepburn rescue
Reply #10 - Aug 31st, 2017 at 10:27am
Print Post  
marlinguy wrote on Aug 31st, 2017 at 12:25am:
steel-pounder wrote on Aug 30th, 2017 at 3:56pm:
anyway do to severe pitting I am thinking of doing a plumb brown finish to simulate the rusting and leaving the provenance of this piece instead of welding the worst pits and filing the action smooth again. Wondering what the thoughts of others are?


Never thought rust pits were considered provenance, or anything I'd want to keep. I'm not a fan of restored guns, but some guns are too far gone to leave as they are found. And more so if the wood is gone, and it needs replacement.


part of my thinking of this is to remove the biggest part of the rust pits I am afraid I will have to thin the receiver too much to get them all out.
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 7526
Location: Oregon
Joined: Feb 2nd, 2009
Re: hepburn rescue
Reply #11 - Aug 31st, 2017 at 11:16am
Print Post  
steel-pounder wrote on Aug 31st, 2017 at 10:27am:
part of my thinking of this is to remove the biggest part of the rust pits I am afraid I will have to thin the receiver too much to get them all out.


I have a young fella who's father is a certified welder, and taught his son to weld. He's in college locally and does all sorts of welding out of their garage for cash. I've had him weld up bad pits after I draw file the shallow ones out. Usually charges me $20-$30, but occasionally it's run up near $100 for a lot of welding.
After it's finished, I draw file again, and then polish it and send it off for CCH. He uses a mild steel filler, so the tig weld isn't a PITA to draw file, and CCH nicely.
  

Vall
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Ol_Deuce
Senior Forum Member
****
Offline



Posts: 317
Location: Billings,Montana
Joined: Nov 19th, 2008
Re: hepburn rescue
Reply #12 - Aug 31st, 2017 at 10:20pm
Print Post  
westerner wrote on Aug 30th, 2017 at 6:24pm:
I didn't really hijack it. Only half hijacked it. I put some nice polite stuff in those posts.  I got your twenty bore gun beat all to hell. Look at this one! Ed Brown slug gun in the all time ugly dishonorable lowly .39 caliber. Top that!


By the way, Bob, you're an Accessory.



           Joe.


Joe   how do you shoot that thing???? Upside down !!!
I didn't see any Side Sights ????  Thats a late 1800s trick gun LoL   over the shoulder shooter  Wink Grin Grin Grin Smiley

Ol Deuce
  

Do The Best With What You Got !!!
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Online



Posts: 9144
Location: The West of coarse
Joined: May 29th, 2006
Re: hepburn rescue
Reply #13 - Sep 1st, 2017 at 1:55pm
Print Post  
The regular way.  Looks bad but is shot like all rifles. While we're waiting check this one out. A Ed Brown FBW rifle. Note the stock work. Classic Ed Brown.


           Joe.
  
Back to top
 
IP Logged
 
calledflyer
Frequent Elocutionist
*****
Offline



Posts: 1567
Joined: Mar 9th, 2015
Re: hepburn rescue
Reply #14 - Sep 1st, 2017 at 3:24pm
Print Post  
Well, in years to come, restoration on that one will be a piece of cake. Just toss it behind the seat in your pickup and in a few months it'll be as good as new. Smiley
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 2 
Send TopicPrint