Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Low Wall Swap (Read 324 times)
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2461
Location: Southern NJ
Joined: Aug 1st, 2010
Low Wall Swap
May 21st, 2019 at 11:03am
Print Post  
Have an original Low Wall and an original High Wall (both are flat-spring actions). The Low Wall has a SST and the High Wall a DST with Helm lever. Am wondering if the DST trigger group w/lower tang & lever can be swapped into the Low Wall without major gun-smithing surgery?
  

Glenn
Back to top
 
IP Logged
 
kensmachine
Senior Forum Member
****
Offline



Posts: 306
Joined: Nov 21st, 2012
Re: Low Wall Swap
Reply #1 - May 21st, 2019 at 11:38am
Print Post  
all high and low wall lower tangs will interchange but there are some misalignment in the fitting on the flat side receivers as the receivers are just a little smaller on the outside.  now if you have a flare side low wall the lower tang will slip in and the misalignment will be very small Ken
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint