Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Replacing H108 (Read 671 times)
sportslube
Senior Forum Member
****
Offline



Posts: 400
Location: Eau Claire, wi
Joined: May 13th, 2008
Replacing H108
Aug 8th, 2019 at 9:26pm
Print Post  
Running out of my H108.  What are other powders and loads,  for a 32 MS in a gain twist barrel.
Thanks in advance
  
Back to top
 
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"

Posts: 3341
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: Replacing H108
Reply #1 - Aug 9th, 2019 at 8:25pm
Print Post  
Thereís WC820, but of course thatís getting hard to find as well. 

Iíve never tried it myself, but Iíve been told by folks who know a lot more than I do that you can substitute Accurate  Cool#9 grain for grain (weight) and get equal results.

Froggie
  
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 7173
Joined: Apr 8th, 2009
Re: Replacing H108
Reply #2 - Aug 9th, 2019 at 8:41pm
Print Post  
I personally have had good success with Aiiant 300MP in a 32-40, 28-35, 25-21 and now my new to me 25-35 using the same charge as H-108. And I also traded 32lbs of H-108 for the same. But in all honesty AA 4100 might be your better choice as it has already proven to be the overall better choice for all of small capacity cases as you yourself is currently  trying to improve on.
  
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 7173
Joined: Apr 8th, 2009
Re: Replacing H108
Reply #3 - Aug 9th, 2019 at 8:56pm
Print Post  
Probably should have also mentioned the powder charge for H-108 and 300MP ended up being  the same for all of those that I mentioned I have personally used it in per my prior post. Another thing I have found with using 300MP has been the consistency from starting out with  Lot #1 and now 64 lbs later it has so far always remained to be the same. But again and in all honesty for the 32 Miller short and other small capacity cases of like kind I do believe the AA 4100 to be the better choice for you to try and to first start out working with.
  
Back to top
 
IP Logged
 
Dales
Senior Forum Member
****
Offline



Posts: 283
Location: Western NY
Joined: Oct 21st, 2013
Re: Replacing H108
Reply #4 - Aug 9th, 2019 at 9:32pm
Print Post  
I have had some fair results with 4100 and or Enforcer (same powder) in the 32 RKS case , Which is just a little longer than the 32 Miller.
Dales
  
Back to top
 
IP Logged
 
sportslube
Senior Forum Member
****
Offline



Posts: 400
Location: Eau Claire, wi
Joined: May 13th, 2008
Re: Replacing H108
Reply #5 - Aug 10th, 2019 at 12:51am
Print Post  
Thanks for the suggestions. Will try them out.
Bill
  
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 7173
Joined: Apr 8th, 2009
Re: Replacing H108
Reply #6 - Aug 10th, 2019 at 9:04am
Print Post  
AA4100 / Enforcer has worked out very well in the smaller capacity cases as Dale pointed out. It is also one down from H-108 on the burn rate chart and 300MP is one down from 4759 so a bit slower.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint